68" Tall X 60" Wide X 36" Deep
The Starter section is a complete unit and the addon section is the unit minus one end or frame. The addon unit simply attatches to the starter section end frame.
A side view of the battery rack shows the battery rack can be extended indifferently as long as needed to meet the needs of any Auto Parts Store
A side view of the battery rack shows the battery rack can be extended indifferently as long as needed to meet the needs of any Auto Parts Store
A front side close up image of the battery rack from the customer side.
Special Gravity Feed Decks are welded of .301 gauge wire, approximately 5/16" dia., on 3" grid centers with integral steel support channels and finished with a super slick, corrosion resistant coating.
A rear image of the battery rack shelf. Notice the battery shelves are on a tilt so as customers take a battery for purchase another battery of the same type slides down to take its place.
A front side large image of the battery rack from the customer side.
Special height Regular Duty Wide Span frame for use with the Battery Rack System. 2 upright frames are needed for a starter section and 1 upright frame is needed for each add on section of batter rack shelf
Auto Parts Store Battery A side view of the battery rack shows the battery rack can be extended indifferently as long as needed to meet the needs of any Auto Parts Store