Gondola Shelving provides
shelving on both sides of the fixture, generally placed on the main
sales floor in the middle of the floor to create aisles for displaying
All Island Gondola Shelving is available in
sizes that range from 2' wide, 3' wide, and 4' wide, heights available
from 36" high to 96" high, and base shelf depths from 8" Deep to 30"
Gondola End Cap
is best configured using a Single Sided section that will
provide the most strength for the display of light to heavy
merchandise as the base shoes connect directly to the basic upright.
Shelf fences and dividers
are available for the most popular size shelves in lengths of 3 and 4
foot with heights of 3 and 6 inches, dividers are available for most
shelves to 30 inches long with heights of 3 and 6 inches.
Heavy gauge steel wire construction,
powder coated for long life and extra wear constructed for Potato
Chips in a Grocery Store, Candy, Bed Linen, and more.
What is a
Gondola Section and a Gondola End?
If you will notice via the
illustrations below the Gondola Section includes everything except the
second Gondola End as only one Gondola End is needed per Gondola
Section when creating a multi section Gondola Aisle. To complete the
Gondola Aisle a Gondola End is Necessary.
Used Gondola Shelving Section
To create a gondola aisle
of used Gondola Shelving as pictured in the images on the top of this
page you will use the Gondola Section pieces below to configure your
aisle length as the sections are available in either 3 or 4 foot
sections and your will need an end to complete your aisle of Gondola.
A Gondola End is used to
complete a Gondola Aisle of Used Gondola Shelving. For example a 16'
Gondola Aisle will consist of 4 Gondola Sections and 1 Gondola End to
complete the Aisle.
A Gondola Section includes 2 lower
shelves, 1 upright, 2 base shoes, 2 backs, 2 kick-plates, 1 upper
spanner, 1 center spanner, and 1 lower spanner.
||A Gondola End includes 1
upright, & 2 base shoes.